diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 604 |
1 files changed, 188 insertions, 416 deletions
@@ -1,408 +1,127 @@ # Copyright © Tavian Barnes <tavianator@tavianator.com> # SPDX-License-Identifier: 0BSD -# This Makefile implements the configuration and build steps for bfs. It is -# portable to both GNU make and the BSD make implementations (how that works -# is documented below). To build bfs, run +# To build bfs, run # -# $ make config +# $ ./configure # $ make +# Utilities and GNU/BSD portability +include build/prelude.mk + # The default build target default: bfs .PHONY: default -# BSD make will chdir into ${.OBJDIR} by default, unless we tell it not to -.OBJDIR: . - -# We don't use any suffix rules -.SUFFIXES: - -# GNU make has $^ for the full list of targets, while BSD make has $> and the -# long-form ${.ALLSRC}. We could write $^ $> to get them both, but that would -# break if one of them implemented support for the other. So instead, bring -# BSD's ${.ALLSRC} to GNU. -.ALLSRC ?= $^ - -# GNU and BSD make have incompatible syntax for conditionals, but we can do a -# lot with just recursive variable expansion. Inspired by -# https://github.com/wahern/autoguess -TRUTHY,y := y -TRUTHY,1 := y - -# Normalize ${V} to either "y" or "" -IS_V := ${TRUTHY,${V}} - -# Suppress output unless V=1 -Q, := @ -Q := ${Q,${IS_V}} - -# Show full commands with `make V=1`, otherwise short summaries -MSG = @msg() { \ - MSG="$$1"; \ - shift; \ - test "${IS_V}" || printf '%s\n' "$$MSG"; \ - test "$${1:-}" || return 0; \ - test "${IS_V}" && printf '%s\n' "$$*"; \ - "$$@"; \ - }; \ - msg - -# Platform detection -OS != uname -ARCH != uname -m - -# For out-of-tree builds, e.g. -# -# $ make config BUILDDIR=/path/to/build/dir -# $ make BUILDDIR=/path/to/build/dir -BUILDDIR ?= . - -# Shorthand for build subdirectories -BIN := ${BUILDDIR}/bin -GEN := ${BUILDDIR}/gen -OBJ := ${BUILDDIR}/obj - -# GNU make strips a leading ./ from target names, so do the same for BSD make -BIN := ${BIN:./%=%} -GEN := ${GEN:./%=%} -OBJ := ${OBJ:./%=%} - -# Installation paths -DESTDIR ?= -PREFIX ?= /usr -MANDIR ?= ${PREFIX}/share/man - -# Configurable executables; can be overridden with -# -# $ make config CC=clang -CC ?= cc -INSTALL ?= install -MKDIR ?= mkdir -p -PKG_CONFIG ?= pkg-config -RM ?= rm -f - -# Configurable flags - -CPPFLAGS ?= -CFLAGS ?= \ - -g \ - -Wall \ - -Wformat=2 \ - -Werror=implicit \ - -Wimplicit-fallthrough \ - -Wmissing-declarations \ - -Wshadow \ - -Wsign-compare \ - -Wstrict-prototypes -LDFLAGS ?= -LDLIBS ?= - -EXTRA_CPPFLAGS ?= -EXTRA_CFLAGS ?= -EXTRA_LDFLAGS ?= -EXTRA_LDLIBS ?= - -GIT_VERSION != test -d .git && command -v git >/dev/null 2>&1 && git describe --always --dirty || echo 3.1.3 -VERSION ?= ${GIT_VERSION} - -# Immutable flags -export BFS_CPPFLAGS= \ - -D__EXTENSIONS__ \ - -D_ATFILE_SOURCE \ - -D_BSD_SOURCE \ - -D_DARWIN_C_SOURCE \ - -D_DEFAULT_SOURCE \ - -D_GNU_SOURCE \ - -D_LARGEFILE64_SOURCE \ - -D_POSIX_PTHREAD_SEMANTICS \ - -D_FILE_OFFSET_BITS=64 \ - -D_TIME_BITS=64 -export BFS_CFLAGS= -std=c17 -pthread - -# Platform-specific system libraries -LDLIBS,DragonFly := -lposix1e -LDLIBS,Linux := -lrt -LDLIBS,NetBSD := -lutil -LDLIBS,SunOS := -lsocket -lnsl -_BFS_LDLIBS := ${LDLIBS,${OS}} -export BFS_LDLIBS=${_BFS_LDLIBS} - -# Build profiles -ASAN ?= n -LSAN ?= n -MSAN ?= n -TSAN ?= n -UBSAN ?= n -GCOV ?= n -LINT ?= n -RELEASE ?= n - -export ASAN_CFLAGS= -fsanitize=address -export LSAN_CFLAGS= -fsanitize=leak -export MSAN_CFLAGS= -fsanitize=memory -fsanitize-memory-track-origins -export UBSAN_CFLAGS= -fsanitize=undefined - -# https://github.com/google/sanitizers/issues/342 -export TSAN_CPPFLAGS= -DBFS_USE_TARGET_CLONES=0 -export TSAN_CFLAGS= -fsanitize=thread - -export SAN=${ASAN}${LSAN}${MSAN}${TSAN}${UBSAN} -export SAN_CFLAGS= -fno-sanitize-recover=all - -# MSAN and TSAN both need all code to be instrumented -export NOLIBS= ${MSAN}${TSAN} - -# gcov only intercepts fork()/exec() with -std=gnu* -export GCOV_CFLAGS= --coverage -std=gnu17 - -export LINT_CPPFLAGS= -D_FORTIFY_SOURCE=3 -DBFS_LINT -export LINT_CFLAGS= -Werror -O2 - -export RELEASE_CPPFLAGS= -DNDEBUG -export RELEASE_CFLAGS= -O3 -flto=auto - -# Save the new value of these variables, before they potentially get overridden -# by `-include ${CONFIG}` below - -_XPREFIX := ${PREFIX} -_XMANDIR := ${MANDIR} - -_XOS := ${OS} -_XARCH := ${ARCH} - -_XCC := ${CC} -_XINSTALL := ${INSTALL} -_XMKDIR := ${MKDIR} -_XRM := ${RM} - -_XCPPFLAGS := ${CPPFLAGS} -_XCFLAGS := ${CFLAGS} -_XLDFLAGS := ${LDFLAGS} -_XLDLIBS := ${LDLIBS} - -# GNU make supports `export VAR`, but BSD make requires `export VAR=value`. -# Sadly, GNU make gives a recursion error on `export VAR=${VAR}`. - -_BUILDDIR := ${BUILDDIR} -_PKG_CONFIG := ${PKG_CONFIG} - -export BUILDDIR=${_BUILDDIR} -export PKG_CONFIG=${_PKG_CONFIG} - -export XPREFIX=${_XPREFIX} -export XMANDIR=${_XMANDIR} - -export XOS=${_XOS} -export XARCH=${_XARCH} - -export XCC=${_XCC} -export XINSTALL=${_XINSTALL} -export XMKDIR=${_XMKDIR} -export XRM=${_XRM} - -export XCPPFLAGS=${_XCPPFLAGS} -export XCFLAGS=${_XCFLAGS} -export XLDFLAGS=${_XLDFLAGS} -export XLDLIBS=${_XLDLIBS} - -# The configuration file generated by `make config` -CONFIG := ${GEN}/config.mk --include ${CONFIG} - -## Configuration phase (`make config`) - -# Makefile fragments generated by `make config` -MKS := \ - ${GEN}/vars.mk \ - ${GEN}/deps.mk \ - ${GEN}/objs.mk \ - ${GEN}/pkgs.mk - -# cat a file if V=1 -VCAT,y := @cat -VCAT, := @: -VCAT := ${VCAT,${IS_V}} - -# The configuration goal itself -config: ${MKS} - ${MSG} "[ GEN] ${CONFIG}" - @printf 'include $${GEN}/%s\n' ${.ALLSRC:${GEN}/%=%} >${CONFIG} - ${VCAT} ${CONFIG} -.PHONY: config - -# Saves the configurable variables -${GEN}/vars.mk: - @${XMKDIR} ${@D} - ${MSG} "[ GEN] $@" - @config/vars.sh >$@ - ${VCAT} $@ -.PHONY: ${GEN}/vars.mk - -# Check for dependency generation support -${GEN}/deps.mk: ${GEN}/vars.mk - ${MSG} "[ GEN] $@" - @+${MAKE} -rs -f config/deps.mk TARGET=$@ - ${VCAT} $@ - @printf -- '-include %s\n' ${OBJS:.o=.d} >>$@ -.PHONY: ${GEN}/deps.mk - -# Lists file.o: file.c dependencies -${GEN}/objs.mk: - @${XMKDIR} ${@D} - ${MSG} "[ GEN] $@" - @for obj in ${OBJS:${OBJ}/%.o=%}; do printf '$${OBJ}/%s.o: %s.c\n' "$$obj" "$$obj"; done >$@ -.PHONY: ${GEN}/objs.mk - -# External dependencies -PKG_MKS := \ - ${GEN}/libacl.mk \ - ${GEN}/libcap.mk \ - ${GEN}/libselinux.mk \ - ${GEN}/liburing.mk \ - ${GEN}/oniguruma.mk - -# Auto-detect dependencies and their build flags -${GEN}/pkgs.mk: ${PKG_MKS} - ${MSG} "[ GEN] $@" - @printf 'include $${GEN}/%s\n' ${.ALLSRC:${GEN}/%=%} >$@ - @+${MAKE} -rs -f config/pkgs.mk TARGET=$@ - ${VCAT} $@ -.PHONY: ${GEN}/pkgs.mk - -# Auto-detect dependencies -${PKG_MKS}: ${GEN}/vars.mk - @+${MAKE} -rs -f config/pkg.mk TARGET=$@ - @if [ "${IS_V}" ]; then \ - cat $@; \ - elif grep -q PKGS $@; then \ - printf '[ GEN] %-18s [y]\n' $@; \ - else \ - printf '[ GEN] %-18s [n]\n' $@; \ - fi -.PHONY: ${PKG_MKS} +# Include the generated build config, if it exists +-include gen/config.mk + +## Configuration phase (`./configure`) # bfs used to have flag-like targets (`make release`, `make asan ubsan`, etc.). # Direct users to the new configuration system. asan lsan msan tsan ubsan gcov lint release:: - @printf 'error: `%s %s` is no longer supported. ' "${MAKE}" $@ >&2 - @printf 'Use `%s config %s=y` instead.\n' "${MAKE}" $$(echo $@ | tr '[a-z]' '[A-Z]') >&2 + @printf 'error: `%s %s` is no longer supported. Use `./configure --enable-%s` instead.\n' \ + "${MAKE}" $@ $@ >&2 @false -# Print an error if `make` is run before `make config` -${CONFIG}:: - @if ! [ -e $@ ]; then \ - printf 'error: You must run `%s config` before `%s`.\n' "${MAKE}" "${MAKE}" >&2; \ +# Print an error if `make` is run before `./configure` +gen/config.mk:: + if ! [ -e $@ ]; then \ + printf 'error: You must run `./configure` before `%s`.\n' "${MAKE}" >&2; \ false; \ fi +.SILENT: gen/config.mk ## Build phase (`make`) # The main binary -bfs: ${BIN}/bfs +bfs: bin/bfs .PHONY: bfs # All binaries BINS := \ - ${BIN}/bfs \ - ${BIN}/tests/mksock \ - ${BIN}/tests/units \ - ${BIN}/tests/xspawnee \ - ${BIN}/tests/xtouch + bin/bfs \ + bin/tests/mksock \ + bin/tests/ptyx \ + bin/tests/units \ + bin/tests/xspawnee \ + bin/tests/xtouch \ + bin/bench/ioq all: ${BINS} .PHONY: all # All object files except the entry point LIBBFS := \ - ${OBJ}/src/alloc.o \ - ${OBJ}/src/bar.o \ - ${OBJ}/src/bfstd.o \ - ${OBJ}/src/bftw.o \ - ${OBJ}/src/color.o \ - ${OBJ}/src/ctx.o \ - ${OBJ}/src/diag.o \ - ${OBJ}/src/dir.o \ - ${OBJ}/src/dstring.o \ - ${OBJ}/src/eval.o \ - ${OBJ}/src/exec.o \ - ${OBJ}/src/expr.o \ - ${OBJ}/src/fsade.o \ - ${OBJ}/src/ioq.o \ - ${OBJ}/src/mtab.o \ - ${OBJ}/src/opt.o \ - ${OBJ}/src/parse.o \ - ${OBJ}/src/printf.o \ - ${OBJ}/src/pwcache.o \ - ${OBJ}/src/stat.o \ - ${OBJ}/src/thread.o \ - ${OBJ}/src/trie.o \ - ${OBJ}/src/typo.o \ - ${OBJ}/src/version.o \ - ${OBJ}/src/xregex.o \ - ${OBJ}/src/xspawn.o \ - ${OBJ}/src/xtime.o - -# Group relevant flags together -ALL_CFLAGS = ${CPPFLAGS} ${CFLAGS} ${DEPFLAGS} -ALL_LDFLAGS = ${CFLAGS} ${LDFLAGS} + obj/src/alloc.o \ + obj/src/bar.o \ + obj/src/bfstd.o \ + obj/src/bftw.o \ + obj/src/color.o \ + obj/src/ctx.o \ + obj/src/diag.o \ + obj/src/dir.o \ + obj/src/dstring.o \ + obj/src/eval.o \ + obj/src/exec.o \ + obj/src/expr.o \ + obj/src/fsade.o \ + obj/src/ioq.o \ + obj/src/mtab.o \ + obj/src/opt.o \ + obj/src/parse.o \ + obj/src/printf.o \ + obj/src/pwcache.o \ + obj/src/sighook.o \ + obj/src/stat.o \ + obj/src/thread.o \ + obj/src/trie.o \ + obj/src/typo.o \ + obj/src/version.o \ + obj/src/xregex.o \ + obj/src/xspawn.o \ + obj/src/xtime.o + +# All object files +OBJS := ${LIBBFS} # The main binary -${BIN}/bfs: ${LIBBFS} ${OBJ}/src/main.o +bin/bfs: obj/src/main.o ${LIBBFS} +OBJS += obj/src/main.o ${BINS}: @${MKDIR} ${@D} - +${MSG} "[ LD ] $@" ${CC} ${ALL_LDFLAGS} ${.ALLSRC} ${LDLIBS} -o $@ + +${MSG} "[ LD ] $@" ${CC} ${_CFLAGS} ${_LDFLAGS} $^ ${_LDLIBS} -o $@ ${POSTLINK} -# All object files -OBJS := \ - ${OBJ}/src/main.o \ - ${OBJ}/tests/alloc.o \ - ${OBJ}/tests/bfstd.o \ - ${OBJ}/tests/bit.o \ - ${OBJ}/tests/ioq.o \ - ${OBJ}/tests/main.o \ - ${OBJ}/tests/mksock.o \ - ${OBJ}/tests/trie.o \ - ${OBJ}/tests/xspawn.o \ - ${OBJ}/tests/xspawnee.o \ - ${OBJ}/tests/xtime.o \ - ${OBJ}/tests/xtouch.o \ - ${LIBBFS} - # Get the .c file for a .o file -CSRC = ${@:${OBJ}/%.o=%.c} +CSRC = ${@:obj/%.o=%.c} -# Depend on ${CONFIG} to make sure `make config` runs first, and to rebuild when -# the configuration changes -${OBJS}: ${CONFIG} - @${MKDIR} ${@D} - ${MSG} "[ CC ] ${CSRC}" ${CC} ${ALL_CFLAGS} -c ${CSRC} -o $@ +# Save the version number to this file, but only update version.c if it changes +gen/version.i.new:: + ${MKDIR} ${@D} + build/version.sh | tr -d '\n' | build/embed.sh >$@ +.SILENT: gen/version.i.new -# Save the version number to this file, but only update VERSION if it changes -${GEN}/NEWVERSION:: - @${MKDIR} ${@D} - @printf '%s\n' '${VERSION}' >$@ +gen/version.i: gen/version.i.new + test -e $@ && cmp -s $@ $^ && ${RM} $^ || mv $^ $@ +.SILENT: gen/version.i -${GEN}/VERSION: ${GEN}/NEWVERSION - @test -e $@ && cmp -s $@ ${.ALLSRC} && rm ${.ALLSRC} || mv ${.ALLSRC} $@ - -# Rebuild version.c whenever the version number changes -${OBJ}/src/version.o: ${GEN}/VERSION -${OBJ}/src/version.o: CPPFLAGS := ${CPPFLAGS} -DBFS_VERSION='"${VERSION}"' +obj/src/version.o: gen/version.i ## Test phase (`make check`) # Unit test binaries UTEST_BINS := \ - ${BIN}/tests/units \ - ${BIN}/tests/xspawnee + bin/tests/units \ + bin/tests/xspawnee # Integration test binaries ITEST_BINS := \ - ${BIN}/tests/mksock \ - ${BIN}/tests/xtouch + bin/tests/mksock \ + bin/tests/ptyx \ + bin/tests/xtouch # Build (but don't run) test binaries tests: ${UTEST_BINS} ${ITEST_BINS} @@ -414,125 +133,178 @@ check: unit-tests integration-tests # Run the unit tests unit-tests: ${UTEST_BINS} - ${MSG} "[TEST] tests/units" ${BIN}/tests/units + ${MSG} "[TEST] tests/units" bin/tests/units .PHONY: unit-tests -${BIN}/tests/units: \ - ${OBJ}/tests/alloc.o \ - ${OBJ}/tests/bfstd.o \ - ${OBJ}/tests/bit.o \ - ${OBJ}/tests/ioq.o \ - ${OBJ}/tests/main.o \ - ${OBJ}/tests/trie.o \ - ${OBJ}/tests/xspawn.o \ - ${OBJ}/tests/xtime.o \ - ${LIBBFS} - -${BIN}/tests/xspawnee: \ - ${OBJ}/tests/xspawnee.o +# Unit test objects +UNIT_OBJS := \ + obj/tests/alloc.o \ + obj/tests/bfstd.o \ + obj/tests/bit.o \ + obj/tests/ioq.o \ + obj/tests/list.o \ + obj/tests/main.o \ + obj/tests/sighook.o \ + obj/tests/trie.o \ + obj/tests/xspawn.o \ + obj/tests/xtime.o + +bin/tests/units: ${UNIT_OBJS} ${LIBBFS} +OBJS += ${UNIT_OBJS} + +bin/tests/xspawnee: obj/tests/xspawnee.o +OBJS += obj/tests/xspawnee.o # The different flag combinations we check INTEGRATIONS := default dfs ids eds j1 j2 j3 s INTEGRATION_TESTS := ${INTEGRATIONS:%=check-%} # Check just `bfs` -check-default: ${BIN}/bfs ${ITEST_BINS} +check-default: bin/bfs ${ITEST_BINS} +${MSG} "[TEST] bfs" \ - ./tests/tests.sh --make="${MAKE}" --bfs="${BIN}/bfs" ${TEST_FLAGS} + ./tests/tests.sh --make="${MAKE}" --bfs="bin/bfs" ${TEST_FLAGS} # Check the different search strategies -check-dfs check-ids check-eds: ${BIN}/bfs ${ITEST_BINS} +check-dfs check-ids check-eds: bin/bfs ${ITEST_BINS} +${MSG} "[TEST] bfs -S ${@:check-%=%}" \ - ./tests/tests.sh --make="${MAKE}" --bfs="${BIN}/bfs -S ${@:check-%=%}" ${TEST_FLAGS} + ./tests/tests.sh --make="${MAKE}" --bfs="bin/bfs -S ${@:check-%=%}" ${TEST_FLAGS} # Check various flags -check-j1 check-j2 check-j3 check-s: ${BIN}/bfs ${ITEST_BINS} +check-j1 check-j2 check-j3 check-s: bin/bfs ${ITEST_BINS} +${MSG} "[TEST] bfs -${@:check-%=%}" \ - ./tests/tests.sh --make="${MAKE}" --bfs="${BIN}/bfs -${@:check-%=%}" ${TEST_FLAGS} + ./tests/tests.sh --make="${MAKE}" --bfs="bin/bfs -${@:check-%=%}" ${TEST_FLAGS} # Run the integration tests integration-tests: ${INTEGRATION_TESTS} .PHONY: integration-tests -${BIN}/tests/mksock: \ - ${OBJ}/tests/mksock.o \ - ${LIBBFS} - -${BIN}/tests/xtouch: \ - ${OBJ}/tests/xtouch.o \ - ${LIBBFS} +bin/tests/mksock: obj/tests/mksock.o ${LIBBFS} +OBJS += obj/tests/mksock.o -# `make distcheck` configurations -DISTCHECKS := distcheck-asan distcheck-tsan distcheck-release +bin/tests/ptyx: obj/tests/ptyx.o ${LIBBFS} +OBJS += obj/tests/ptyx.o -# Don't use msan on macOS -IS_DARWIN,Darwin := y -IS_DARWIN := ${IS_DARWIN,${OS}} -DISTCHECK_MSAN, := distcheck-msan -DISTCHECKS += ${DISTCHECK_MSAN,${IS_DARWIN}} +bin/tests/xtouch: obj/tests/xtouch.o ${LIBBFS} +OBJS += obj/tests/xtouch.o -# Only add a 32-bit build on 64-bit Linux -DISTCHECK_M32,Linux,x86_64 := distcheck-m32 -DISTCHECKS += ${DISTCHECK_M32,${OS},${ARCH}} +# `make distcheck` configurations +DISTCHECKS := \ + distcheck-asan \ + distcheck-msan \ + distcheck-tsan \ + distcheck-m32 \ + distcheck-release # Test multiple configurations -distcheck: ${DISTCHECKS} +distcheck: + @+${MAKE} distcheck-asan + @+test "$$(uname)" = Darwin || ${MAKE} distcheck-msan + @+test "$$(uname)" = FreeBSD || ${MAKE} distcheck-tsan + @+test "$$(uname)-$$(uname -m)" != Linux-x86_64 || ${MAKE} distcheck-m32 + @+${MAKE} distcheck-release + @+${MAKE} -C distcheck-release check-install + @+test "$$(uname)" != Linux || ${MAKE} check-man .PHONY: distcheck # Per-distcheck configuration -DISTCHECK_CONFIG_asan := ASAN=y UBSAN=y -DISTCHECK_CONFIG_msan := MSAN=y UBSAN=y CC=clang -DISTCHECK_CONFIG_tsan := TSAN=y UBSAN=y CC=clang +DISTCHECK_CONFIG_asan := --enable-asan --enable-ubsan +DISTCHECK_CONFIG_msan := --enable-msan --enable-ubsan CC=clang +DISTCHECK_CONFIG_tsan := --enable-tsan --enable-ubsan CC=clang DISTCHECK_CONFIG_m32 := EXTRA_CFLAGS="-m32" PKG_CONFIG_LIBDIR=/usr/lib32/pkgconfig -DISTCHECK_CONFIG_release := RELEASE=y +DISTCHECK_CONFIG_release := --enable-release ${DISTCHECKS}:: - +${MAKE} -rs BUILDDIR=${BUILDDIR}/$@ config ${DISTCHECK_CONFIG_${@:distcheck-%=%}} - +${MAKE} -s BUILDDIR=${BUILDDIR}/$@ check TEST_FLAGS="--sudo --verbose=skipped" + @${MKDIR} $@ + @test "$${GITHUB_ACTIONS-}" != true || printf '::group::%s\n' $@ + @+cd $@ \ + && ../configure MAKE="${MAKE}" ${DISTCHECK_CONFIG_${@:distcheck-%=%}} \ + && ${MAKE} check TEST_FLAGS="--sudo --verbose=skipped" + @test "$${GITHUB_ACTIONS-}" != true || printf '::endgroup::\n' + +## Benchmarks (`make bench`) + +bench: bin/bench/ioq +.PHONY: bench + +bin/bench/ioq: obj/bench/ioq.o ${LIBBFS} +OBJS += obj/bench/ioq.o + +## Automatic dependency tracking + +# Rebuild when the configuration changes +${OBJS}: gen/config.mk + @${MKDIR} ${@D} + ${MSG} "[ CC ] ${CSRC}" ${CC} ${_CPPFLAGS} ${_CFLAGS} -c ${CSRC} -o $@ + +# Include any generated dependency files +-include ${OBJS:.o=.d} + +## Packaging (`make dist`, `make install`) + +TARBALL = bfs-$$(build/version.sh).tar.gz -## Packaging (`make install`) +dist: + ${MSG} "[DIST] ${TARBALL}" git archive HEAD -o ${TARBALL} + +distsign: dist + ${MSG} "[SIGN] ${TARBALL}" ssh-keygen -Y sign -q -f $$(git config user.signingkey) -n file ${TARBALL} + +.PHONY: dist distsign DEST_PREFIX := ${DESTDIR}${PREFIX} DEST_MANDIR := ${DESTDIR}${MANDIR} install:: ${Q}${MKDIR} ${DEST_PREFIX}/bin - ${MSG} "[INSTALL] bin/bfs" \ - ${INSTALL} -m755 ${BIN}/bfs ${DEST_PREFIX}/bin/bfs + ${MSG} "[INST] bin/bfs" \ + ${INSTALL} -m755 bin/bfs ${DEST_PREFIX}/bin/bfs ${Q}${MKDIR} ${DEST_MANDIR}/man1 - ${MSG} "[INSTALL] man/man1/bfs.1" \ + ${MSG} "[INST] man/man1/bfs.1" \ ${INSTALL} -m644 docs/bfs.1 ${DEST_MANDIR}/man1/bfs.1 ${Q}${MKDIR} ${DEST_PREFIX}/share/bash-completion/completions - ${MSG} "[INSTALL] completions/bfs.bash" \ + ${MSG} "[INST] completions/bfs.bash" \ ${INSTALL} -m644 completions/bfs.bash ${DEST_PREFIX}/share/bash-completion/completions/bfs ${Q}${MKDIR} ${DEST_PREFIX}/share/zsh/site-functions - ${MSG} "[INSTALL] completions/bfs.zsh" \ + ${MSG} "[INST] completions/bfs.zsh" \ ${INSTALL} -m644 completions/bfs.zsh ${DEST_PREFIX}/share/zsh/site-functions/_bfs ${Q}${MKDIR} ${DEST_PREFIX}/share/fish/vendor_completions.d - ${MSG} "[INSTALL] completions/bfs.fish" \ + ${MSG} "[INST] completions/bfs.fish" \ ${INSTALL} -m644 completions/bfs.fish ${DEST_PREFIX}/share/fish/vendor_completions.d/bfs.fish uninstall:: - ${RM} ${DEST_PREFIX}/share/bash-completion/completions/bfs - ${RM} ${DEST_PREFIX}/share/zsh/site-functions/_bfs - ${RM} ${DEST_PREFIX}/share/fish/vendor_completions.d/bfs.fish - ${RM} ${DEST_MANDIR}/man1/bfs.1 - ${RM} ${DEST_PREFIX}/bin/bfs + ${MSG} "[ RM ] completions/bfs.bash" \ + ${RM} ${DEST_PREFIX}/share/bash-completion/completions/bfs + ${MSG} "[ RM ] completions/bfs.zsh" \ + ${RM} ${DEST_PREFIX}/share/zsh/site-functions/_bfs + ${MSG} "[ RM ] completions/bfs.fish" \ + ${RM} ${DEST_PREFIX}/share/fish/vendor_completions.d/bfs.fish + ${MSG} "[ RM ] man/man1/bfs.1" \ + ${RM} ${DEST_MANDIR}/man1/bfs.1 + ${MSG} "[ RM ] bin/bfs" \ + ${RM} ${DEST_PREFIX}/bin/bfs # Check that `make install` works and `make uninstall` removes everything check-install:: - +${MAKE} install DESTDIR=${BUILDDIR}/pkg - +${MAKE} uninstall DESTDIR=${BUILDDIR}/pkg - ${BIN}/bfs ${BUILDDIR}/pkg -not -type d -print -exit 1 - ${RM} -r ${BUILDDIR}/pkg + +${MAKE} install DESTDIR=pkg + +${MAKE} uninstall DESTDIR=pkg + bin/bfs pkg -not -type d -print -exit 1 + ${RM} -r pkg + +# Check man page markup +check-man:: + ${MSG} "[LINT] docs/bfs.1" + ${Q}groff -man -rCHECKSTYLE=3 -ww -b -z docs/bfs.1 + ${Q}mandoc -Tlint -Wwarning docs/bfs.1 ## Cleanup (`make clean`) # Clean all build products clean:: - ${RM} -r ${BIN} ${OBJ} + ${MSG} "[ RM ] bin obj" \ + ${RM} -r bin obj # Clean everything, including generated files distclean: clean - ${RM} -r ${GEN} ${DISTCHECKS} + ${MSG} "[ RM ] gen distcheck-*" \ + ${RM} -r gen ${DISTCHECKS} .PHONY: distclean |